As the saying goes, life is like a plane flying, not in how far and how high, the key is a smooth landing. In fact, life is like a car, not open how fast and how far in the can, the key is to want to stop brake live.

In our life there are always some not brake the car owners, the result is often lead to some tragedy.

To you and your familys safety, before the trip must not mean that five minutes, do a little self braking, after all, safety is the most important.

1, look at the

Methods: To observe the brake disc appearance, have a look there is no dirt, dust more, if the car dust your lot, please clean the car.

Note: when the disc brake is hot do not rinse the brakes, it may cause the brake disc deformation.

2, tentacles sense

Methods: To observe the brakes, and gently touch the brake disc, scratches, if appear more deep scratches, it is necessary to pay attention to, the polishing or the replacement, should go to repair plant repair technicians specialized processing.

Note: touch pads must pay attention to the temperature, a few times heavier brake can make brake hot.

3, pinch thickness

Methods: the amount of wear inspection car brake pads, brake disc wear volume in the provisions of manufacturers within the scope of, hand probably compare, if a large amount of wear, should consider to find a professional repair technicians have a look whether you need to replace. Compare the four wheel brake disc wear is uniform.

Note: still need to be careful of the brake disc temperature, dont be hot.

4, check the liquid level

Check the level of the brake fluid, brake fluid pot here.

Method: check the brake fluid level, unscrew the brake fluid level should be in the pot, between the two scale, too much, too little will affect the braking force, to the right is appropriate.

Check brake fluid color?

Note: to prevent water, gasoline and some solid debris falling into the brake fluid pot, these things may lead to system power loss.

5, see the instrument

The dashboard brake system warning lights came on means that the problem of brake system, then the need for systematic examination

1, have a look the handbrake is put off, (put the handbrake standard)

2, have a look the brake fluid is sufficient, it is already there

3, have a look the brake pads are too thin, is it right?

4, unplug the battery power for a few seconds and then plug in, have a look whether can remove the fault sensors.

Note: if it is their own can not solve the case, or hurriedly contact repair master.